Home Products Job Work Gallery About Case Studies Blog Contact
Get a Quote

Rail Track Equipment Gearboxes

KL spiral bevel miter gearboxes for rail maintenance and track machinery — 1:1 power split, compact square housings, flange-mounted options.

Anand Gears KL spiral bevel miter gearbox for rail equipment

Rail & Track Machinery

KL Miter Bevel Gearboxes for Track Equipment

Rail-track maintenance equipment often needs a compact 90° miter that splits or redirects torque without changing speed. Anand Gears KL series spiral bevel gearboxes in the 1:1 miter configuration are built for that duty — Gleason-type spiral teeth, square compact bodies, and optional flange mounting plates matched to the machine frame.

KL spiral bevel miter, typically 1:1
Compact square body (e.g. KL-75 class ~84 mm square housing variants)
Flange-mounted or foot-mounted options
Custom output mounting plates and shaft overall lengths (mm)
Recurring lot manufacturing for OEMs
Drawings and technical data sheets for supplier approval

Configuration Detail

What OEMs Usually Specify

Item Typical values (illustrative)
SeriesKL spiral bevel (e.g. KL-75 class)
Ratio1:1 miter (30T class pairs used on rail builds)
BodyCompact square; custom PCD on flange faces (mm)
ShaftsKeyed shafts, custom overall length; keyways in mm
MountingFlange-mounted output plate and/or foot mounting — specify per lot

Application example (anonymized): rail-track equipment OEMs ordering recurring lots of KL-75 class 1:1 miter bevels with flange-mounted output plates for track machinery frames.

Related: Bevel Gearboxes · Custom & Special · Screw Jacks (multi-jack systems use KL/bevels too)

FAQ

Rail Track Equipment Gearboxes — Common Questions

What does KL miter mean?

KL is Anand Gears' spiral bevel gearbox family. A miter configuration is usually 1:1 — input and output speeds match, with shafts at 90 degrees.

Can you match an existing flange PCD?

Yes. Provide the mounting plate drawing or measured PCD and hole pattern in millimetres. We machine flange faces and plates to those dimensions.

Are these only for rail?

No. The same KL miter units serve packaging, material handling, and multi-jack systems. Rail track equipment is one high-volume application pattern we support.

Budgetary offer — Rail Track Equipment Gearboxes

Tell us the duty and we’ll send you a number

Power, input speed, and either the ratio or the output speed you need are usually enough to start. Our engineers reply on the same working day.

Have a nameplate photo, a drawing, or the old unit in front of you? Send it on WhatsApp — that is the fastest route to a number.

Prefer to talk? +91 98203 83719 or +91 98205 18093.

Full number with STD or country code — that is how we call you back.

We use your details only to answer this enquiry. No newsletters, no sharing.

Thanks — your enquiry has reached us.
We’ll come back on the same working day. For anything urgent, call +91 98205 18093.

Need a KL Miter for Track Equipment?

Send body size (e.g. KL-75 class), ratio (usually 1:1), flange PCD in mm, shaft ends, and mounting plate drawing.

Request a Quote Call +91 9820383719